Skip to content

Sheet 01 · Design ConfiguratorPackage

From the customer's answer to the cutting floor.

Everything the Sales Configurator does, and the drawings, the dimensions, and the DXF the factory works from. One set of rules behind all of it.

1000650750t 25FRONT VIEW10009004 × Ø26 THRU6 × M16PCD 400TOP VIEW5050Ø26DETAIL B (2 : 1)BYOUR TITLE BLOCKROBOT PEDESTAL, SIZE MDWG SAMPLE-001TOL ± 0.5MMSCALE 1 : 10SHEET 1 / 1REV A

Sample drawing · swipe to see the whole sheetGenerated from the same rules that priced it

Sheet 02 · The output3 outputs

Drawings your checker would have drawn.

Dimensioned to your standard, with your title block, your layer naming, and your tolerances. Generated from the same rules that priced it, so the drawing and the quote can never disagree.

  1. Out 1Manufacturing drawing

    1000650750t 25FRONT VIEW10009004 × Ø26 THRU6 × M16PCD 400TOP VIEW5050Ø26DETAIL B (2 : 1)BYOUR TITLE BLOCKROBOT PEDESTAL, SIZE MDWG SAMPLE-001TOL ± 0.5MMSCALE 1 : 10SHEET 1 / 1REV A

    Manufacturing drawing

    Dimensioned and checked against your rules.

  2. Out 2DXF and machine data

    MARK

    CUTMARK

      0  SECTION
  2  ENTITIES
  0  CIRCLE
  8  CUT
 10  50.0
 20  50.0
 40  13.0
  0  TEXT
  8  MARK

    DXF and machine data

    Ready for the cutting floor.

  3. Out 3Flat patterns

    FLATBEND UP 90°BEND UP 90°FOLDED

    Flat patterns

    Sheet metal unfolded, bend allowances applied.

Sheet 03 · How the rules get built5 stages

How your knowledge gets in.

Our design engineers do the capture. Yours do the deciding and the approving. Nothing is automated before you have signed off what goes in, what the rules are, and what comes out.

  1. 01

    Your design data

    From you

  2. 02

    Rules defined together

    Our engineers capture

  3. 03

    You approve them

    Your engineers sign off

    Signed off
  4. 04

    Automated and checked

    We automate and check

  5. 05

    Deployed

    Your team runs it

Sheet 04 · What it removesRepeat work

The drafting that repeats.

The same detail, redrawn for the four hundredth time at a slightly different width. That is the work this removes. The judgement calls stay with your engineers, where they belong.

Detail AW = 500

500802 × Ø13SAME DETAIL · NEW WIDTH

The configurator draws

The same detail, at the new width.

Your engineers keep

The judgement calls.

Sheet 05 · Before it goes liveEdge cases

The awkward ones get checked on purpose.

Before it goes live we run the extremes of every rule, the combinations nobody orders, and the ones everybody does. We compare what the machine drew against what your team would have drawn.

Sample run · the robot cell rules on the home pagePick a case

CompareHeaviest part

R 2597 · PLATE 1200

Configurator drewYour team would draw

Sheet 06 · The other packageSame rules

Sales Configurator

Only need the sales side first?

Start with the Sales Configurator →

Sheet 07 · Next stepDemo

Bring one product line. We will show you its configurator.

Tell us what you make and where the queue builds up. We will map one of your product lines and show you what its configurator would do, using your own rules and your own dimensions.

Helpful to have ready

  • The product line that queues up the most
  • What has to come out at the end: quote, drawing, DXF, or all three
  • Roughly how long a custom quote takes you today

No sales sequence. One reply from the people who would build it.