CadEazy Book a demo

Design automation for manufacturers

Every conveyor
Already engineered.

Conveyors, cranes, gearboxes, process plant, moulds and steel doors. CadEazy captures how your products are designed and turns it into your own platform: enter the order and get the 3D model, drawings, bill of materials and quote, checked against your engineering rules.

In production at

Effica AutomationSpectra PlastGV ToolsSelens IndiaReelPower IndustrialArokia IT LLCAtatri

Try the platform

Pick a product. Change a value.

Eight product families, from conveyors and cranes to gearboxes, process plant, tooling and automated storage. Every model, drawing and number here is generated live by example rules and checked as you go. Your platform runs your rules, your templates and your price list.

Demo workspace/Cranes/Double-girder EOT
Rules engine ready

Drag to orbit

3D could not start in this browser. The rules still run: see the inspector.

Rebuilt in –Revision AExample rules

Traditional vs automated design

One custom order. 2,460 minutes by hand. 13 with CadEazy.

A customer changes one dimension and the order goes round the design office again: quote, model, drawings, parts list, checking. With your rules in the platform, the same outputs arrive in minutes, checked the same way every time.

By handWith CadEazyAll times in minutes
Quote with price
240 min
2 min
3D model
480 min
3 min
General arrangement drawing
360 min
2 min
Manufacturing drawings
960 min
4 min
Bill of materials and cut list
180 min
1 min
Engineering check
240 min
1 min
By hand2,460 min
With CadEazy13 min
Saved on one order2,447 min

Example: one custom 18 m belt conveyor order. Typical times for a design office working by hand. In the first workshop we measure your own.

01 · Time

Nothing can be priced until the drawing exists.

02 · People

The work waits on the few engineers who know the rules.

03 · Risk

Every manual step is a place a wrong number gets through.

Capabilities

If it follows rules, we can automate it.

The eight families in the platform are a sample. We build for 240 product families across 20 manufacturing sectors, with the same depth for a 1.5 kg flange as for a 50-tonne crane.

  1. 20manufacturing sectors

    From conveyors and cranes to gearboxes, moulds and process plant.

  2. 240product families

    Every one of them configurable, every one rule-based.

  3. 31live types

    Different structures, running in the platform above right now.

  4. 1,000svalid designs

    From the example inputs on this website alone. Your platform: endless.

01

Conveyor manufacturers

03

Gearbox manufacturers

04

Process plant and equipment

06

Steel door manufacturers

See all 240 product families The periodic table of configurable products, searchable.

Trust

Your designs stay yours. Your engineers stay in charge.

Four separate commitments: how your information is kept confidential, how the platform is secured, how your engineers approve every design, and who owns the product knowledge.

Confidential

Your information stays private

  • NDA signed before any drawing is shared
  • Only the engineers named on your project open your files
  • Never shared with, or reused for, another customer
Platform security

The platform is protected

  • Encrypted in transit and at rest
  • A separate workspace for each customer
  • Every login, change and download is logged
  • Hosted in our cloud, your cloud or on your premises
Engineering approval

Your engineers approve every design

  • Every product rule is reviewed and signed off by your engineers before release
  • Rule changes are versioned and approved the same way
  • Drawings follow your standards and your title block
Ownership

Your product knowledge stays yours

  • Your design rules, templates and price lists belong to you, in writing
  • Generated drawings and models are standard files: STEP, DWG, PDF, DXF
Read the security overview IT or security team involved? Send us your questionnaire and an engineer will answer it in writing.

Commercials

Pay to set it up. Then pay for what it makes.

There is a setup for each product line, because someone has to capture your rules properly. After that it is priced per output generated. No idle seats, no licence you forgot you were renting. If a quarter is quiet, the bill is quiet.

01

Setup, per product line

Quoted for your product

  • Rule capture with your engineers
  • Inputs, rules and outputs agreed in writing
  • Configurator built on your templates and title block
  • Edge cases run, drawings checked against yours
02

Per output generated

You pay when it produces

  • Quotes, models, drawings and machine files
  • No seat licences, no idle subscriptions
  • Sales, dealers and customers use it freely
  • Product changed? You tell us, we update the rules
03

Your numbers

On the first call

They depend on how many rules it takes to describe your product line. Bring one product and we will price it with you.

Book the call
After you signLicence-based toolsCadEazy
What you buyA software licence you still have to configureThe configurator, and the team who builds it with you
Who writes your product rulesYour team, after training or scriptingOur design engineers, approved by yours
Automation specialists in-houseYes, you hire or train themNo, rule capture is our job
Who runs it day to dayA trained designerSales, dealers and customers
Pricing shapeAnnual licence per seatSetup per product line, then per output
When the product changesYour team edits the rulesYou tell us. We update the rules.

Every row comes down to one question: after you sign, who actually does the work?

Questions

CadEazy, in short.

What is CadEazy?
CadEazy is a design automation and CAD configurator platform for manufacturers. It turns your product rules into 3D models, dimensioned manufacturing drawings, bills of materials and quotes, in minutes for each order.
Who is CadEazy for?
CadEazy is for manufacturers of products whose design follows rules: conveyors, cranes and hoists, gearboxes, process plant, valves, moulds, dies and fixtures, steel doors, racking and electrical panels.
What does CadEazy produce for each order?
For each order CadEazy produces the 3D model (STEP), manufacturing drawings (PDF), drafting files (DWG), cutting profiles (DXF), meshes (STL), the bill of materials and the quote, to your title block and naming.
How is CadEazy priced?
CadEazy charges a setup fee for each product line, to capture your rules, and then a fee per output generated. There are no seat licences.
Do we need CAD or automation specialists to use CadEazy?
No. CadEazy design engineers capture your rules with your engineers and keep them up to date. Sales people, dealers and customers use the configurator with no CAD skill.
How is CadEazy different from CAD automation software?
Licence-based tools give you software that your own team must configure and maintain. With CadEazy, our engineers build and maintain the configurator for you, and you pay for what it produces.
Is our design data safe with CadEazy?
Yes. Files move only after an NDA is in place, your engineers approve every design, and the product knowledge stays yours. See Security.

Keep scrolling

One input. Endless output.

Behind every order

Every file every team asks for.

Drawings for the customer, models for engineering, profiles for the cutting floor, lists for purchasing and a quote for sales. Then the next order, and the next, and nobody redraws a line.

STEPDWGPDFDXFSTLBOMQUOTE